Acroprint timeQplus (software version 4.x and above) Manual do Utilizador descarregar pdf (Página 58)

timeQplus Administrator Functions

06-0414-000 Rev. B 54

Adding a Serial Connected Time Clock

Make sure the Time Clock is powered on and you have a USB cable connected correctly to the timeQplus

Server or client PC. Note: Serial connectivity is only available with Biometric (Finger), Proximity, and

Hand Punch Time Clocks.

Step 1 - The Server/PC

• Navigate to Control Panel>Device Manager>Ports

• Locate the Time Clock just connected and note the COM#. This # will be input as the Serial Port

# later.

• Right click on this Time Clock, then select ‘Properties’, then select the ‘Port Settings’ tab

• Select and note for future use the value in the ‘Bits per second’ drop down field. This value will be

input as the Baud Rate later.

Step 2 - The Time Clock

For Biometric or Proximity:

• Press ‘Menu’.

• Select Options and press OK.

• Select Comm Opt and press OK.

• Navigate to and input the desired values for:

o BaudRate

o Dev Num (will be used on the timeQplus Serial Connection setup window)

• The following must be set as noted:

o Ethernet N

o RS232 N

o RS485 N

o USB Y

o COMM Key 0

• Once changes are complete, press ESC and then press OK to save.

Note

: For Hand Punch, please refer to the hand punch user manual for configuration instructions.

Step 3 - timeQplus

• Click the Time Clock button on the left Navigation Bar or click View on the top menu bar and

choose Time Clock.

• Click the Comm Port (RS232) tab on the left of Time Clock Manager screen.

• Click the ‘Add Time Clock’ button. The "Serial Connection" window will appear.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 87 88

Sem comentários

Acroprint timeQplus (software version 4.x and above) Manual do Utilizador Página 58